NEWS
LISEN
09
2022
-
12
High barrier coating, 400m/min, high-speed cutting, zero stretching!
Lishen · Domestic Coating Equipment
400~600m/min, zero stretching!
As a functional packaging material, soft packaging film materials often require good barrier properties, such as water resistance, oxygen resistance, light resistance, etc.
There are four basic ways to improve barrier performance:
Using high barrier substrates such as aluminum foil, PVDC film, nylon film, and polyester film;
Using co extrusion method to prepare films, such as EVOH co extrusion film and nylon co extrusion film;
Using coating methods such as aluminum plating, aluminum plating, and silicon oxide plating;
Using the coating method, such as coating PVDC (polyvinylidene chloride) or K film, and coating PVA (polyvinyl alcohol) or A film.
Among all A-films, APE is a coating film that is more difficult to produce because the PE substrate is soft, easy to stretch, and has poor high-temperature resistance, which has special requirements for coating equipment, process, and material performance.
For coating equipment, it is necessary to adapt to problems such as easy stretching, shrinkage deformation, and poor high-temperature resistance of PE film. The accuracy and requirements of tension control are extremely high, and how to balance the temperature setting of the oven and the coating effect is a challenge. If a coating equipment can produce APE, then coating any other substrate is not a problem!
The Shantou Lishen Machinery team, together with Mr. Yang Weihong, General Manager of Guangdong Xinruiqinuo, have developed a coating equipment with a width of 2.4m and a speed of 400m/min after more than two years of debugging and improvement.
This device has successfully overcome multiple difficulties, solving the problem of high-speed cutting and splicing of single pulling MDOPE winding, leveling of high-speed coating, thermal efficiency of the oven after coating, and zero stretching of the film in the oven after coating!
Unique oven design, successfully achieving zero stretching of the substrate
Equipment highlights
1. MDOPE automatic cutting technology;
2. High speed coating at 400m/min;
3. Unique oven tension control technology,
Zero stretching of the film.
The equipment was officially mass-produced in Xinruichino in October 2021 and is currently running well!
Mature technical solution and verified development results, currently Lishen is producing a coating machine with a coating speed of up to 600m/min for a certain enterprise!
Enterprises interested in developing coating films are welcome to cooperate with Lishen Machinery!
Customized equipment and personalized functions can be customized according to the personalized needs of the enterprise and the process!
Welcome to inquire
Lishen Machinery
Mr. Li 139 0272 6706
Fax:+86-754-89800806
Add:Building B9,Baoyuan Industrial Zone, NorthQishan, Jinping District, Shantou City
Mobile website
Copyright © 2023 Shantou Lishen Environmental Protection Machinery Co., Ltd
粤ICP备2022124506号 Powered by:www.300.cn SEO